TESTING RESULTS FOR ALL STANDARD SERIES GRT & PNT MAGNETIC SEPARATORS
Innovative Magnetic Separators tested @ 126+ oz. pull (7.87lbs.)
Up To 20+% Stronger Than The Highest Reported Results
Magnets positioned for maximum efficiency, capture & contain contamination
Pull Test on a Magnet
Common sense suggests that if a pull test on a magnet measures strong enough to remove a 0.250" steel ball, then that magnet will easily remove larger tramp iron contamination.
Testing Methodology
A 1/4" steel ball point contact test piece attached to a non-magnetic shaft is the only fair pull test piece for all magnets.
Most Value, Removing Contamination
Get the most value with your magnet purchase and remove all unwanted magnetic contamination.
Protecting machinery or product why not the same test to evaluate all types & shapes of magnets to determine magnet strength.
Direct Contact Magnet
CERTIFICATIONS
Available Forced Gauge Test Kit
(NIST) Calibration Certified to 0.3% Accuracy
Forced Gage Operation
- 30 hour battery USB or AC Charging
- USB Data Logging
- Selectable units: lbf/kgf/N/ozf
- Peak Force Hold & Recall
- Zero Gage Display
- Meets NIST Standards
Meets NIST Standards
This available forced gage electronic instrument testing kit meets the accuracy requirements of the National Institute of Standards & Technology (NIST).
Proven Effective
Larger test pieces will always pull test stronger on any magnet. Larger steel balls or larger iron pieces are inappropriate & will always compromise effectiveness.